Our Seattle-based crews carry the parts and the know-how to get your air moving again today. Priority scheduling available across Seattle and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
If anything feels off after we leave, a follow-up call gets a technician back out to make it right.
Leonard HVAC didn't start as a franchise chasing volume. We invest in ongoing training so our techs recognize a failing capacitor, a cracked heat exchanger, or a refrigerant leak before it turns into an emergency.
We're not interested in being the cheapest quote on the page — we're the team that shows up in the truck, not a subcontractor we've never met. We carry the credentials Seattle inspectors and property managers expect to see, and we keep that documentation available on request for every job, big or small.
Seattle's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Seattle and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Seattle is a small enough community that reputation travels fast.
When you call +1-866-805-8548, you're talking to someone who understands the local permitting process, the common equipment brands installed in Seattle homes, and realistic scheduling given local demand. Our warranty and service history records stay attached to your address, so any future technician who visits already has the full picture.
We cover the full range of heating, cooling, and air quality work Seattle properties actually need.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Seattle dispatch team sends the closest available truck first so a technician is diagnosing your system as fast as physically possible.
We keep the truck stocked with the parts that fail most often on the equipment common to Seattle homes, which is exactly why most repairs don't require a return visit.
Not every repair call ends in a repair — sometimes the honest recommendation is a properly sized replacement. We walk Seattle homeowners through financing and rebate options where available before a single piece of equipment gets ordered.
Most installs in Seattle are completed in a single day, and we walk you through the new thermostat and any app controls before we leave.
A retail floor, a restaurant kitchen, or an office suite can't run without stable climate control. Our commercial division services multi-zone commercial buildouts across Seattle, with service agreements built around your operating hours.
We understand that a commercial call isn't just about comfort, it's about keeping a business open.
A seasonal tune-up catches the kind of wear that turns into a mid-summer no-cool call. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Seattle households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
This is the standard every Seattle technician on our team is held to.
Details vary by job type and are always shared upfront, never buried in fine print.
We quote a flat rate before work begins and that number doesn't change once you approve it.
A technician doesn't consider the job done until the system is tested and performing correctly.
A little attention to how your system is running can save you a lot of money and discomfort.
A healthy system runs with a consistent, low hum — banging, screeching, or grinding usually points to a loose part or failing motor.
This is one of the most common complaints we hear on service calls across Seattle.
Gradual efficiency loss is easy to miss month to month, but it adds up fast over a season.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
Chemical odors may signal a refrigerant leak, which requires a licensed technician to handle safely.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
We explain diagnostic fees and repair estimates before authorizing work.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
We don't consider a job finished until the system is actually performing correctly.
Our techs recognize brand-specific quirks instead of learning your system on the job.
Photos and plain-language notes accompany every diagnostic.
We'll walk you through what's actually available before you decide.
A snapshot of the feedback that keeps us accountable.
"Our AC quit on the hottest weekend of the year and they had a tech out within a couple of hours. The pricing was exactly what they quoted over the phone."
"We've used them for our maintenance plan for two years now and never had a surprise breakdown. You can tell these guys actually know what they're doing."
"Explained the sizing calculation so I understood why they weren't just installing the same unit again. Followed up a week later just to check everything was still running fine."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Now our go-to for every property in the portfolio."
"The estimate matched the final invoice exactly, down to the dollar. Would use them again without hesitation."
"Diagnosed a failed capacitor and had it swapped within the hour. This is the company I'm saving in my phone now."
None of these are unusual or embarrassing — they're just the normal wear and tear that comes with running a system through Seattle's seasonal swings.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Before the heaviest cooling months hit, it's worth having the refrigerant charge checked, the condenser coils cleaned, and the filter replaced — all of which directly affect how hard the compressor has to work.
Simple habits between professional visits also matter. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Whether your Seattle home has a traditional split system, a ductless mini-split, a heat pump, or a hybrid dual-fuel setup, our crews are equipped to diagnose and repair it. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Handles the majority of Seattle installs and specializes in properly sizing equipment for older housing stock.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Experienced with the light industrial and retail equipment common across the area.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
Our policy is simple: you approve the number before we touch the system.
We staff after-hours dispatch specifically because HVAC failures rarely happen on a convenient schedule.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Ask your technician about current plan pricing during any service call.
Our dispatch area extends throughout the greater Seattle region and nearby towns within Seattle, WA.
Our commercial team handles rooftop units, multi-zone systems, and facility contracts alongside our standard residential repair work.
Our technicians are trained across the major residential and commercial equipment lines, not limited to a single manufacturer.
Ask about financing during your in-home estimate to see what fits your situation.
Systems that run harder due to heavy year-round use may benefit from more frequent check-ins.
Beyond basic safety checks, it's best to leave diagnosis to a licensed technician rather than attempting a repair yourself.
We'd rather quote it honestly on the phone than have you feel ambushed by the bill.
Most standard repairs are completed in under two hours once the technician has diagnosed the issue and you've approved the quote.
For most residential visits, yes, an adult should be present to grant access and approve any quoted work.
From the older, established streets near the center of Seattle to the newer developments on the outskirts, our trucks cover the full footprint of the city.
Larger properties get the same upfront pricing and licensed technicians as a single-family service call, just coordinated at scale.
A full system replacement is one of the bigger home expenses most people face, and we don't expect everyone to pay it in a single lump sum. If a rebate or local incentive program applies to your Seattle installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
Coverage extends across Seattle proper and into the nearby zip codes listed below.
Property managers with multiple Seattle addresses can consolidate everything under one account for simpler scheduling and consistent pricing across every location.
